PE gas pipes

Product Categories

Stainless Steel Flexible Corrugated Hoses
PE Pipes and Fittings

New Products

Hot Products

Random Products

Product Categories: PE Pipes

Company Profile Tel ：86-574-88958009 Fax：86-574-88929808

Product Description:

Polyethylene gas pipes, word of Company PE polymer make to adopt, raw materials that choose, have a good one but welding, a good one resist environmental stress fracture fast transitivity, raw materials performance has exceeded the demand for the international standard.

Features:

1)Corrosion resistant: polyethylene is inert material. Except for few strong oxidant, this material can resist many chemical matters, no electron chemical corrosion, and do not need corrosion proof layer.

2)Non-poisonous: there are not any heavy metal additives in PE pipe for water supply. It is not easy for PE pipe to be covered with dirt and contaminated by bacterium.

3)Low flow resistance: the interior wall of PE pipe is smooth, the friction coefficient is very low and the flux of a fluid is very high.

4)No leakage: PE pipe for water supply adopts fusion connection (thermal fusion or election fusion), comparing with rubber and other machinery connect points, it can not occur the leakage as connect point distorted.

5)High ductility: PE pipe for water supply passes high ductility, its extension ration at break can not excess 500%, and has strong ability for fit with pipe tank non-uniform setting.

6)Excellent flexibility: the flexibility of polyethylene makes PE pipe for water supply can be coiled. It is used for no pipe tank construction. Layout PE pipe for water supply depends the demand of construction.

7)Good resistance ability for scratch: scratch can make the material strength concentration and cause pipe damage.

8)Resistance to impact: PE pipes are so tough that they do not intend to rupture if heavy presses the pipes directly.

9)Convenient for construction: pipes are light and handled friendly

10) Long service life: more than 50 years

Thickness(mm)
PE80		PE100
SDR17.6	SDR11	SDR17.6	SDR11
Pressure（bar）
PN8	PN12.5	PN10	PN16
32	--	3.0	--	3.0
40	--	3.7	--	3.7
50	--	4.6	--	4.6
63	3.8	5.8	3.8	5.8
75	4.5	6.8	4.5	6.8
90	5.4	8.2	5.4	8.2
110	6.6	10.0	6.6	10.0
125	7.4	11.4	7.4	11.4
140	8.3	12.7	8.3	12.7
160	9.5	14.6	9.5	14.6
180	10.7	16.4	10.7	16.4
200	11.9	18.2	11.9	18.2
225	13.4	20.5	13.4	20.5
250	14.8	22.7	14.8	22.7
280	16.6	25.4	16.6	25.4
315	18.7	28.6	18.7	28.6
355	21.1	32.2	21.1	32.2
400	23.7	36.3	23.7	36.3
450	26.7	40.9	26.7	40.9
500	29.7	45.4	29.7	45.4
560	33.2	50.8	33.2	50.8
630	37.4	57.2	37.4	57.2